volumenmesskoerper

Volume standards

Volumetric measurement equipment (test standards) for calibrating pump flow rates

Volume standards are so-called working standards and are primarily used for testing and calibration. Volume standards as volumetric measurement tanks are produced with a tolerance of 0.1% to 0.02% (upon request). For tolerances over 0.05%, volume standards are fitted with a drip control. They are used in the mineral oil industry for checking dispensing quantity at pumps, petrol pumps, in tanker trucks and in pipe provers. They are used in the food industry for calibrating milk collecting and milk dispensing machines.
Eichkolben 10 l, 20 l und 50 l mit Entleerung

Articles in the range Volume standards

Mineral oil trade Refineries Testing service provider Weights and Measures Offices

Airports - test equipment volume standards 200 l, 2,000 l, 5,000 l

Stationary test equipment for checking dispensing quantity at airports. Consists of a 200l, 2,000l and 5,000l volume standard as a working standard. Upright volume standard with feet for checking dispensing quantity at petrol pumps, in tanker trucks or refuelling systems .

Sizes: 5l, 10l, 20l, 50l, 100l, 200l, 500l, 1,000l, 2,000l, 5,000l Tolerance: ±0.1% pursuant to PTB Volume 26 or ±0.05% pursuant to OIML (from 10l)

Test liquid:
low viscosity mineral oils or water

Material:
– for mineral oils: Stainless steel 1.4301
– for AdBlue: Stainless steel 1.4571/1.4404

Design:

  • Filling from top via the neck
  • Disposal via draining
  • Scale engraved from stainless steel
  • Displacer
  • Circular level
  • according to size with 3-4 feet
  • Bottom discharge as a ball valve or shut-off valve
  • Sight glass with drip control
  • optional: Filling pipe with sight glass for checking levels with 1-3 thermometer tubes depending on the size
  • Pre-calibration
  • Displacer


Additional options for volume standards:

  1. Air vent with deflagration flame arrestor
  2. Filling pipe with shut-off valves and sight glass for checking levels (from 100 l)
  3. Overfill protection
  4. Manhole cover (from 500 l)
  5. Material version 1.4571 (suitable for AdBlue)

Draining basin on volume standard

Detailed description: draining basin on horizontal volume standard

Repairer Testing service provider Weights and Measures Offices

Test equipment with horizontal volume standards 10 l, 20 l, 50 l, 100 l

MOBILE TEST EQUIPMENT for testing filling pumps for mineral oils and products with biogenic components consisting of: horizontal volume standards in sizes: 10l, 20l, 50l, 100l l

Execution

  • volume standard with scale
  • Accuracy class: ± 0.1%
  • Material: Stainless steel: 1.4301
  • Design: horizontal
  • Separate foam collector for each volume standard with central bleeding/venting valve
  • Sight glass with stainless steel scale
  • Preconfigured volume standard
  • Process control sight glass with drainage section on each volume standard with integrated butterfly valve
  • Displacer in each volumetric flask with the option to seal
  • Temperature tubes in each volumetric flask

Frame
for storing the volume standards with circular level, optional with manual levelling device.

Mineral oil trade Repairer Testing service provider Weights and Measures Offices

Test equipment for liquid gas petrol pumps

MOBILE TEST EQUIPMENT for inspecting liquid gas petrol pumps. for LPG, liquid gas.
consisting of:
Displacer volume standards for volumes: 50 l
DESIGN:
  • Operating pressure: 0/+25 bar
  • Operating temperature: -10°C to +40°C
  • volume standards with 2 scales (0 l and 50 l)
  • Accuracy class: ± 0.2%
  • Material: Stainless steel: 1.4301
  • Design: horizontal
Equipment also includes:
  • Sight glass with stainless steel scale
  • Preconfigured volume standard
  • Test pressure gauge
  • Temperature tubes
  • Frame for storing the volume standards with circular level, optional with manual levelling device
  • Expansion tank for water feed
Accessories:
Hose reel
Earth cable
Vehicle body

Dear Sir or Madam,
Dear Mr Weinert,
27.04.2021


On April 30, 2021, we will open another site at Allergopharma GmbH & Co. KG in Reinbek to support COVID 19 vaccine production in the presence of Federal Minister Spahn and Minister President Günther. We would have been pleased to invite you to this opening.

Unfortunately, this was not possible due to the pandemic.
We would therefore like to take this opportunity to thank you for your extraordinary commitment to supplying equipment at short notice to support vaccine production. Allergopharma, as part of Dermapharm Holding SE, is now a further partner in the Europe-wide production network for the vaccine of BioNTech and Pfizer. This network now comprises more than a dozen important pharmaceutical manufacturers and suppliers. From now on, one of four production steps will take place in Reinbek: the vaccine formulation. This is where our mRNA active ingredient is combined with the lipids. A protective shell is created around the mRNA and the vaccine can reach its target in the body to induce the necessary immune response.


Your company has made a very important contribution to the global pandemic response with great know-how and under incredible time pressure. We would like to express our sincere thanks to you and your team! Without their commitment, the successful completion of the project would not have been possible.
We look forward to working with you in partnership in the future!

Dr. Hans-Georg Feldmeier – CEO Dermapharm SE
Dr. Sierk Poetting – CFO and COO BioNTech SE