behaelterbau

Storage tank

Tank for storing products

Storage tanks are used to store finished products, raw and ancillary materials, water and cleaning agents. Pressurised or depressurised tanks can be equipped with heating, insulation, mass or level measurement systems, sensors, integrated CIP cleaning lances and much more, and are used in a wide variety of industries.
ansatzanlage1

Articles in the range Storage tank

Transportbehälter mit Schwallblechen
Chemical industry

Storage and transport tank

High quality storage tanks.
Rectangular wall with dome pressure cover. The tank is fitted with baffle plates.
Equipment also includes:
  • Baffle plates
  • Air inlet/vent
AREA OF APPLICATION:
Industry: Food industry, chemical industry
Product: Liquids, water
SIZE:
100 l– 4.000 l
OPERATING DATA:
Tank product chamber:
p = 0 bar, depressurised
t = +10 / +50 °C
Double wall:

not present

MATERIAL:
Parts in contact with product 1.4301/1.4404 , with APZ 3.1 AD 2000
Request article
Configure article
cip2
Biotechnology Cosmetics industry

CIP tanks with insulating material

Pharmaceutical mixing and process tank for CIP liquids pursuant to PED 2014/68/EU based on module G.
Upper section with folding dome pressure cover and welded conical nozzle. Torispherical base design.

The tank is equipped with a heating/cooling jacket and insulation cover.

Equipment also includes:
  • Magnetic stirrer as a bottom agitator for a viscosity of 100 mPas
  • Metaglas sight glass
  • LED sight glass lights
  • Rupture disc / safety valve
  • Product tubes
  • CIP cleaning nozzle
AREA OF APPLICATION:
Industry: pharmaceutical, food industry
Product: Cleaning liquids, demineralised water
SIZE:
500 l – 4.000 l
OPERATING DATA:
Tank product chamber:
p = -1 / +3 bar,
t = -10 / +150 °C
Double wall:
p = -1 / +3,5 bar,
t = -10 / +150 °C
MATERIAL:
Parts in contact with product 1.4404/ 1.4435/ 316L , with APZ 3.1 AD 2000, Ra <0.5µm
Request article
Configure article
lager
Chemical industry Cosmetics industry Food industry

Storage tank - single-walled

High quality storage container.

Torispherical head, cylindrical wall with dome pressure cover. The tank is equipped with a heating/cooling jacket and insulation cover.

Equipment also includes:
  • Rupture disc / safety valve
  • Product tubes
  • Baffle plates
  • Air inlet/vent
AREA OF APPLICATION:
Industry: Food industry, chemical industry
Product: Liquids, water
SIZE:
100 l – 4.000 l
OPERATING DATA:
Tank product chamber:
p = 0 / +0,5 bar,
t = +10 / +50 °C
Double wall:

not present

MATERIAL:
Parts in contact with product 1.4301/1.4404 , with APZ 3.1 AD 2000
Request article
ansatzbehaelter
Cosmetics industry Food industry Pharmaceutical

Process tank with hinged cover

Mobile stirring tank in line with good engineering practice Consisting of 1 250l stirring tank for producing pharmaceutical formulations. Depressurised, flat surface. The flat cover is equipped with a 1/3 inlet opening and a seal. Torispherical base design. The container is supplied as a single-walled unit.

Equipment also includes:

  • Base stirrer as a magnetic stirring unit 250 mPas
  • Hinged cover with seal and locking mechanism
  • Bottom valve with angled actuator
  • CIP lance


Size:
50 l – 1.000 l

Operating information
Tank product chamber:
p = 0 bar, depressurised
t = +10 / +50 °C
Double wall:
not present

Material
Parts in contact with product available in 1.44404 or 1.4435, with APZ 3.1 AD 2000, Ra <0.3µm

Request article
Configure article

Company

portfolio

links

Dear Sir or Madam,
Dear Mr Weinert,
27.04.2021


On April 30, 2021, we will open another site at Allergopharma GmbH & Co. KG in Reinbek to support COVID 19 vaccine production in the presence of Federal Minister Spahn and Minister President Günther. We would have been pleased to invite you to this opening.

Unfortunately, this was not possible due to the pandemic.
We would therefore like to take this opportunity to thank you for your extraordinary commitment to supplying equipment at short notice to support vaccine production. Allergopharma, as part of Dermapharm Holding SE, is now a further partner in the Europe-wide production network for the vaccine of BioNTech and Pfizer. This network now comprises more than a dozen important pharmaceutical manufacturers and suppliers. From now on, one of four production steps will take place in Reinbek: the vaccine formulation. This is where our mRNA active ingredient is combined with the lipids. A protective shell is created around the mRNA and the vaccine can reach its target in the body to induce the necessary immune response.


Your company has made a very important contribution to the global pandemic response with great know-how and under incredible time pressure. We would like to express our sincere thanks to you and your team! Without their commitment, the successful completion of the project would not have been possible.
We look forward to working with you in partnership in the future!

Dr. Hans-Georg Feldmeier – CEO Dermapharm SE
Dr. Sierk Poetting – CFO and COO BioNTech SE