Process vessels

Process vessels

Our process vessels do more than stir and mix. Depending on the implementation, they monitor, regulate and control the physical and chemical states of your product. Our IRIS monitoring system provides bidirectional data flow between a mobile system and your data server – including formulation control.

Articles in the range Process vessels

Reactors

Reactor

Reactor tank pursuant to PED 2014/68/EU Cat. IV.

Cylindrical reactor with swivel catch in horizontal design. Total volume 7,000l.

Equipment also includes:
  • Swivel catch
  • Welded saddles
AREA OF APPLICATION:
Industry: Chemicals, paper restoration
Product: Liquids, water, solvents
SIZE:
7.000l
OPERATING DATA:
Tank product chamber:
p = -1/+3 bar
t = +10 / +50 °C
Double wall:

not present

MATERIAL:
Parts in contact with product 1.4301/1.4404 , with APZ 3.1 AD 2000
Biotechnology Chemical industry Pharmaceutical

Process tank for sterile production

Pharmaceutical process tank for the sterile production of serum pursuant to PED 2014/68/EU cat. 4/module G, ATEX Directive 2014/34/EU and MD 2006/42/EU.
Top section as pressure dome cover with welded conical nozzle. Torispherical base design. The tank is equipped with a control system, analysis technology and filter. The tank is equipped with a heating/cooling jacket and insulation cover.
Equipment also includes:
  • Magnetic stirrer for a viscosity of 250 mPas
  • Filter for sterile filtration
  • pH measurement
  • O² measurement
  • Metaglas sight glass
  • LED sight glass lights
  • D-ended sight glass in casing
  • Rupture disc / safety valve
  • Product tubes
  • CIP-compatible sampling and outlet valve
  • CIP cleaning nozzle
  • ATEX design
  • Control cabinet in line with ATEX
AREA OF APPLICATION:
Industry: Pharmaceutical
Cytostatic drugs, serum production
SIZE:
10l – 800l
OPERATING DATA:
Tank product chamber:
p = -0,5 / +3,5 bar,
t = -10 / +150 °C
Double wall:
p = -0,5 / +4,5 bar,
t = -10 / +150 °C
MATERIAL:
Parts in contact with product 1.4539 , Delta ferrite <1%, with APZ 3.2/3.1 AD 2000, Ra <0.8µm
Cosmetics industry Food industry Pharmaceutical

Stirring tank with angled turbine blade and protective grille

Agitator vessel with inclined blade agitator and mesh guard grille.

Detail view
Pharmaceutical process and filling tank for pharmaceutical tablet production in line with good engineering practice. Upper section with folding dome pressure cover and welded conical nozzle. Torispherical base design. The tank is equipped with a heating/cooling jacket and insulation cover.

Equipment also includes:
  • Top propeller for a viscosity of 500 mPas
  • CIP cleaning nozzle
  • Bottom valve
AREA OF APPLICATION:
Industry: pharmaceutical, food industry
Product: Tablet base
SIZE:
100 l – 800 l
OPERATING DATA:
Tank product chamber:
p = depressurised
t = -10 / +130 °C
Double wall:
p = -1 / +3,5 bar,
t = -10 / +130 °C
MATERIAL:
Parts in contact with product 1.4404/ 1.4435/ 316L , with APZ 3.1 AD 2000, Ra <0.85µm

Dear Sir or Madam,
Dear Mr Weinert,
27.04.2021


On April 30, 2021, we will open another site at Allergopharma GmbH & Co. KG in Reinbek to support COVID 19 vaccine production in the presence of Federal Minister Spahn and Minister President Günther. We would have been pleased to invite you to this opening.

Unfortunately, this was not possible due to the pandemic.
We would therefore like to take this opportunity to thank you for your extraordinary commitment to supplying equipment at short notice to support vaccine production. Allergopharma, as part of Dermapharm Holding SE, is now a further partner in the Europe-wide production network for the vaccine of BioNTech and Pfizer. This network now comprises more than a dozen important pharmaceutical manufacturers and suppliers. From now on, one of four production steps will take place in Reinbek: the vaccine formulation. This is where our mRNA active ingredient is combined with the lipids. A protective shell is created around the mRNA and the vaccine can reach its target in the body to induce the necessary immune response.


Your company has made a very important contribution to the global pandemic response with great know-how and under incredible time pressure. We would like to express our sincere thanks to you and your team! Without their commitment, the successful completion of the project would not have been possible.
We look forward to working with you in partnership in the future!

Dr. Hans-Georg Feldmeier – CEO Dermapharm SE
Dr. Sierk Poetting – CFO and COO BioNTech SE